mytrix76
01-10 01:20 PM
My wife's H1 is valid until 2009. We have to travel to Canada very soon and she will return on AP (EAD approved). Can she continue on H1 for the sponsoring company as it is or any amendment/filing has to be done to regain the H1 status. I dont want her to switch to EAD (just in case things go wrong down the lane)
I read a couple of conflicting articles on this. From this link i interpret that one can continue on H1 after entering US on AP
http://www.murthy.com/news/UDnewins.html
"An H-1 or L-1 holder who travels out of the United States, and returns on advance parole, is authorized to continue working for the H-1 or L-1 employer. He/she would not be required to obtain an EAD to work for this same employer, within the validity dates of the H-1 or L-1 petition approval."
Can some one please throw some light.
Thanks
I read a couple of conflicting articles on this. From this link i interpret that one can continue on H1 after entering US on AP
http://www.murthy.com/news/UDnewins.html
"An H-1 or L-1 holder who travels out of the United States, and returns on advance parole, is authorized to continue working for the H-1 or L-1 employer. He/she would not be required to obtain an EAD to work for this same employer, within the validity dates of the H-1 or L-1 petition approval."
Can some one please throw some light.
Thanks
wallpaper To tune our drivetrain,
balu_g
01-06 08:07 AM
Hi Mayra75, Yes this is a bad situation for immigrants. Hope it will be resolved in 2006. If you dont have any other option, you can look for a job in a University or a Non-profit organization which does not come under the cap.
anilsal
10-12 12:52 AM
If you apply too early, then if you get approved early, you lose out on overlapping days.
If you apply and the EAD does not come in time, then you are off the payroll until the thing actually comes.
Interim EAD is the immediate solution to this.
If you apply and the EAD does not come in time, then you are off the payroll until the thing actually comes.
Interim EAD is the immediate solution to this.
2011 aprila sr 50 tuning,
cox
November 14th, 2007, 08:50 AM
HI Keith,
Having shot 10's of thousands of pics on my cameras, I can tell you that I have formatted each of my CF cards only once, when I bought them. I've never had to reformat them for any reason. As Mats said, be careful not to pull them out of the camera when it's writing and you should have no problems.
There are many sensor cleaning threads here, but I'll echo the blower advice. The less you touch the sensor, the better off you are. I use an oilless diaphragm air compressor (for airbrush use, ~$100). It gives higher pressure air than a bulb blower, and has no propellants or oil in it that could end up on the camera. Most 'real' camera stores have sensor cleaning pads & solution these days. I too have used cotton swabs, and they will work, provided you don't leave any cotton fibers behind, which are a worse problem than the dust.
Good luck & have fun!
Having shot 10's of thousands of pics on my cameras, I can tell you that I have formatted each of my CF cards only once, when I bought them. I've never had to reformat them for any reason. As Mats said, be careful not to pull them out of the camera when it's writing and you should have no problems.
There are many sensor cleaning threads here, but I'll echo the blower advice. The less you touch the sensor, the better off you are. I use an oilless diaphragm air compressor (for airbrush use, ~$100). It gives higher pressure air than a bulb blower, and has no propellants or oil in it that could end up on the camera. Most 'real' camera stores have sensor cleaning pads & solution these days. I too have used cotton swabs, and they will work, provided you don't leave any cotton fibers behind, which are a worse problem than the dust.
Good luck & have fun!
more...
hyderabad123
01-11 03:58 PM
Hi,
I-485 was denied, then applied MTR on June 2010. I didnt recieve nay update, we are planning to travel hometown bcz of personel problems. I called to expediate on my petiton, they opened SR, after that i recieve the response saying that, ur petition with IO, once we made the decision will let you know. If you have any exp or any one on it please do share with me. That is more appreciate.
Thanks
I-485 was denied, then applied MTR on June 2010. I didnt recieve nay update, we are planning to travel hometown bcz of personel problems. I called to expediate on my petiton, they opened SR, after that i recieve the response saying that, ur petition with IO, once we made the decision will let you know. If you have any exp or any one on it please do share with me. That is more appreciate.
Thanks
zerozerozeven
07-24 09:19 AM
I got my H1B visa inside the US and when I went to the consulate, the lady refused to stamp my visa. I had to go to the passport office and get an "observation" that my name should be read as
First Name : "FirstName"
Last Name : "LastName"
First Name : "FirstName"
Last Name : "LastName"
more...
tulips
05-25 08:52 AM
Thank you for your reply! He has been out for 9 months now but visited in between. He used H4 to come back and did not get new AP. We did file taxes. How do I know if the application is still valid and it's okay to use EAD?
2010 sr 50 factory
Texascitypaul
02-23 08:33 AM
I am a UK citizen i came to the US in 2008 (aug) when i married my USC wife,i then returned to the UK until Dec 2008 and have been in the US since under VWP,my i94 ran out in march 2009.
I am aware of the "right" way things should have been done, but here i am illegal still with my wife and children (she has 4) i need to try and salvage something out of this meaning i just want to live normal with my family work just like a regular guy get a driving license etc.
Now i have a clean background check from the UK..1 down many to go isuspect...my wife having 4 children would never have been able to prove affit david of support least not on paper (she is a student and graduates as a RN in may of this year) at which point she would be able to earn enough to do this.
Through all this we have managed to survive as a family its hard with only one working but we get help from her parents and family.
$64,000000 question what should i do?
Thankyou for reading
Paul
I am aware of the "right" way things should have been done, but here i am illegal still with my wife and children (she has 4) i need to try and salvage something out of this meaning i just want to live normal with my family work just like a regular guy get a driving license etc.
Now i have a clean background check from the UK..1 down many to go isuspect...my wife having 4 children would never have been able to prove affit david of support least not on paper (she is a student and graduates as a RN in may of this year) at which point she would be able to earn enough to do this.
Through all this we have managed to survive as a family its hard with only one working but we get help from her parents and family.
$64,000000 question what should i do?
Thankyou for reading
Paul
more...
perm2gc
01-08 04:34 PM
How did you guys manage to get H1's so recently from H4?
Is there a way that H4 are exempt from the H1 quota?
The H4 to H1 applied in 2006 quota is very slow.Some cases are getting approval even in jan(one of my friends wife got approval last week).
No rule yet to exempt H4 from H1 quota.
Is there a way that H4 are exempt from the H1 quota?
The H4 to H1 applied in 2006 quota is very slow.Some cases are getting approval even in jan(one of my friends wife got approval last week).
No rule yet to exempt H4 from H1 quota.
hair Exhaust for Aprilia SR50
immi_enthu
12-28 09:39 AM
Which world are u? These dates are there online for more than 2 weeks now.
They were NOT. They just put DEC 14 as the post date but they were NOT available online until yesterday. Now where were you buddy ?
Look for the first news item posted today at : http://www.immigration-law.com/Canada.html
They were NOT. They just put DEC 14 as the post date but they were NOT available online until yesterday. Now where were you buddy ?
Look for the first news item posted today at : http://www.immigration-law.com/Canada.html
more...
nitkad
03-20 05:07 PM
Thanks, according to your reply, it seems it will be good if I leave the company before the I140 gets revoked. Also, what happens if it gets revoked after I leave the company?
hot wie ne SR 50 vo der optik
Suva
07-27 03:23 PM
One of the stupid questions!!!
If NSC had put all applications from July 2nd to July 17th on hold.
Did they open and timestamp it ? for received date ??????
If they did not , then I may be lucky.
Because my package had signatures and all other dates of June 29th . The day when we were planning to ship the package, but for july fiasco.
Do you guys think ? they might see this and enter it as received date ?
If NSC had put all applications from July 2nd to July 17th on hold.
Did they open and timestamp it ? for received date ??????
If they did not , then I may be lucky.
Because my package had signatures and all other dates of June 29th . The day when we were planning to ship the package, but for july fiasco.
Do you guys think ? they might see this and enter it as received date ?
more...
house :D - ApriliaForum sponsored by
Calouste
07-28 03:51 PM
I'm getting fed up with people on this forum who assume that India is the only country from which people immigrate to the US, and always only mention the India dates when talking about cut off dates, and assume that are the only dates people want to talk about.
Even though India is by far the country of birth with the most high skilled immigrants to the US, it still takes up less than half of the number of high skilled immigrants. By some discussions going on on this forum, you would think 95% of the high skilled immigrants come from India.
Even though India is by far the country of birth with the most high skilled immigrants to the US, it still takes up less than half of the number of high skilled immigrants. By some discussions going on on this forum, you would think 95% of the high skilled immigrants come from India.
tattoo Aprilia SR 50 R Factory
ramaonline
03-18 02:33 AM
You can take an infopass appt at the local office and speak to an immigration officer. I know of a similar case where the USCIS officer said that the derivative 485 application is no longer valid after divorce, and the derivative application will be denied. He sent some email to the service center asking them to deny the derivative 485. The primary 485 was still approved - I don't know what happened to the spouse's application.
In any case as long as you are the primary applicant, and spouse is a derivative applicant- your 485 application will not be affected.
In any case as long as you are the primary applicant, and spouse is a derivative applicant- your 485 application will not be affected.
more...
pictures RollerTuningPage | Roller
erichin2477
06-12 05:42 PM
First of all, make sure you double check everything I say here with an immigration lawyer. I am not an immigration lawyer and my knowledge is based on forums like these.
Ok.
You still have another 2 months before you begin the last year of your initial 6-year H1 term.
If you new employer is willing to do H1, then FILE H1 as soon as possible. You will get a 3 year H1 term with your new employer based on your current 140 that is approved(with your current employer). The thing is - beyond the 6th year, you can get 3 year extensions of H1 if your 140 is approved(with someone, anyone, it doesnt have to be your employer at that time). Now, if you quit your current employer and go with new one and you end up getting only 1 year H1 with the new employer(in case if you cannot somehow use your current approved 140 to get a 3 year H1), then its still ok. But have your new employer start the new GC's labor right away. That way, you will have 365 days passed when your 6 year term is over in Aug 2007, making you eligible for 7th year of H1. This is very important.
Yes, if your old employer is going to withdraw your labor and 140, then your new employer will have to start GC from scratch. That begins with PERM labor. If you file under EB2, I think you can still transfer your priority date from your old EB3 labor and 140 to new EB2 process. (however, better make sure from a lawyer).
you seems to be pretty knowledgeble. Here is My case....
I just got my 45-days letters today and my H1-B will expired on May 2007 for the 6 years.
What should I do?
Question 1
Can I change my lawyer? cuz my lawyer is lame. and I am going to apply for my 7-years since I been waiting for 45-days letter more than 2 years since Feb 2004!!!!
Question 2
Can I change my company and relocate to another state and still keep the current GC application going? I assume my old company will still approve and sign anything that they can help. They are pretty generous.
Thanks.
Ok.
You still have another 2 months before you begin the last year of your initial 6-year H1 term.
If you new employer is willing to do H1, then FILE H1 as soon as possible. You will get a 3 year H1 term with your new employer based on your current 140 that is approved(with your current employer). The thing is - beyond the 6th year, you can get 3 year extensions of H1 if your 140 is approved(with someone, anyone, it doesnt have to be your employer at that time). Now, if you quit your current employer and go with new one and you end up getting only 1 year H1 with the new employer(in case if you cannot somehow use your current approved 140 to get a 3 year H1), then its still ok. But have your new employer start the new GC's labor right away. That way, you will have 365 days passed when your 6 year term is over in Aug 2007, making you eligible for 7th year of H1. This is very important.
Yes, if your old employer is going to withdraw your labor and 140, then your new employer will have to start GC from scratch. That begins with PERM labor. If you file under EB2, I think you can still transfer your priority date from your old EB3 labor and 140 to new EB2 process. (however, better make sure from a lawyer).
you seems to be pretty knowledgeble. Here is My case....
I just got my 45-days letters today and my H1-B will expired on May 2007 for the 6 years.
What should I do?
Question 1
Can I change my lawyer? cuz my lawyer is lame. and I am going to apply for my 7-years since I been waiting for 45-days letter more than 2 years since Feb 2004!!!!
Question 2
Can I change my company and relocate to another state and still keep the current GC application going? I assume my old company will still approve and sign anything that they can help. They are pretty generous.
Thanks.
dresses Koso RX2 Aprilia SR 50 Street
vladdrac
06-14 09:57 PM
that gun is sweet, and I especially like the lettering you put on it
more...
makeup Tuningzylinder
FredG
November 15th, 2007, 11:53 PM
I got in the habit of reformatting cards after a few episodes of returning a card with pix remaining to a different body and having it reset my numbering system. It's not uncommon to download cards from more than one body at a time. It's easier for me to format than to keep track of which card(s) came from which body.
I use (in order) a blower, an arctic butterfly, a lens pen. I check before going to the next step and try to get the job done with the least intrusion.
I use (in order) a blower, an arctic butterfly, a lens pen. I check before going to the next step and try to get the job done with the least intrusion.
girlfriend aprilia sr 50 r tuning,
delhirocks
06-29 11:30 AM
Is there any quota on filing the I 140s? My friend requested his employer for upgrading his 140 and he says that the attorney mentioned that the quota for I 140 is already full. I don't think it is right. Any inromation please.
There is no quota for I 140, the employer is just trying to save money.
There is no quota for I 140, the employer is just trying to save money.
hairstyles 2011 Aprilia Scooter SR 50
psvk
08-06 12:08 PM
Received an email from CRIS stating that Notice mailed welcoming the new permanent resident. Those who are tracking approval, check out IV profile/tracker.
Congrats
Congrats
freedom_fighter
01-27 10:52 AM
Congrats! Enjoy the freedom.
i'm not going anywhere and would like to contribute in what ever way possible to address our cause.
i'm not going anywhere and would like to contribute in what ever way possible to address our cause.
daniel_leavitt2000
February 15th, 2004, 05:29 PM
I have a Sony DSC F717. I got it to photograph model trains, so it is almost lways in macro mode. Frequently, the image blurs toawrds the back, even when set at the highest F-stop. The subject is usially about 5-12 inches away from the camera, depending on the model I am photographing. The models are about an inch high and up to 10 inches long.
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
